E_mail: youjie@youjie-tools.com Tel: +86-511-88031806
Contact Us

Danyang Youjie Tools Co.,Ltd

Address: Houxiang Town ,Danyang City,Jiangsu Province,China

City: Danyang

State: Jiangsu

Postal Code:212312

Country: China

E-mail:youjie@youjie-tools.com ; 

         dahua@dahua-tools.com

Tel: +86-511-88031806

      +86-511-88031807

Fax:+86-511-88012723

News
Home > News > Content

Processing Method And Technology Of Wood Saw Blade

Danyang Youjie Tools Co.,Ltd | Updated: Sep 19, 2017

     Play Wood Note: Because of light weight, faster speed, in hand-held use, because of the vibration of the reasons, stability is not good control, especially with the increase in the speed of propulsion, the greater the difficulty of control. The result is the cutting surface is not good, even the cutting tool run the material, knife off the teeth. As the chainsaw rotates clockwise, it may also rebound.Wood Saw Blade

    Speed faster, so that the speed of propulsion, cutting surface is not straight and rough, in the process of cutting the knife surface and cutting surface friction caused by temperature rise, resulting in cutting surface carbonation (black), and even burned the movement. Saw blades will also reduce the service life due to high temperature. Especially when cutting hard wood and stability control is very obvious. It can hardly be used at angle cutting.Wood Saw Blade

    In the panel, the plate must not have foreign bodies, such as nails, iron cutting and so on. Otherwise, the result is often: knife off the teeth; Therefore, when cutting wood, the main factors that affect security are: stability, cooling speed and the absence of foreign bodies in these three aspects. The above questions are difficult to solve by user's caution and experience. So relying on assistive tools is the right way to solve these problems. Stone can be divided into different depths of cutting processing, can be less than 1m3 stone processing, can treasure, greatly saving stone resources, but also conducive to the protection of the environment. Can be used for various types of stone cutting processing, processing efficiency is higher, coupled with the effective use of small stone, so that production costs are low.Wood Saw Blade

    Replacement of the wheel should be responsible for the person, not with hammer percussion. Tighten the wheel clamping screws, to force evenly. After the exchange, the first test, Operation Normal before work. The maximum speed of the grinding wheel shall not exceed the speed specified in the wheel. When used, to hold the workpiece, the pressure should be uniform, no force impact. Do not grind bulky objects to prevent the grinding wheel from bursting due to improper pressure. Small workpiece application clamp clamping grinding, lest hurt the hand. A grinding wheel shall not be used by two people at the same time.Wood Saw Blade

    No grinding of cemented carbide on ordinary grinding wheels, no grinding of ductile materials such as copper, lead, wood and plastics, and the grinding of ferrous workpieces should be cooled by water. Do not stack objects beside the grinding wheel machine, the use of the finished should be at any time cut off power, do a good job cleaning.Wood Saw Blade



Danyang Youjie Tools Co.,Ltd